Modeler's Mall 2010/01
OV-10 Bronco — $199.95 + S&H
From Hobby Hangar, 4651 Babcock St. N.E., Unit 18, #315, Palm Bay, FL 32905; Tel.: (321) 728-0486; Web: www.hobbyhangar.com
Returning to the RC marketplace is the OV-10 Bronco, the first of the “Prestige Series” offerings from ScaleTech and distributed exclusively by Hobby Hangar. Developed from the original design by Rich Uravitch, this ARF has been thoroughly flight-tested to ensure a high degree of success for the first-time multi-engine, sport-scale RC flier. Its compact size makes it easy to transport, even fully assembled.
The Bronco package comes complete with all required hardware including engine mounts, fuel tanks, wheels, spinners, and control linkages. All airframe components are expertly precovered with iron-on film, and the canopy framing as well as the cowlings are prepainted to match the film covering. A complete set of self-adhesive markings is provided to represent a colorful Bronco that served with the U.S. Navy at the PAX River Naval Air Test Facility.
This 52-inch model is designed for glow power of roughly .25 cu. in. displacement, but it’s easily converted to electric power. A removable cockpit/canopy hatch arrangement allows complete access to batteries and electronic components. An optional cockpit dress-up kit is also available for additional realism.
Following the photo-illustrated instructions, assembly of the kit, including radio and engine installation, takes only approximately 10 hours. The model is provided with a rugged, fixed-gear arrangement, but a retrofit kit to incorporate air-operated retracts is available.
Vintage Style Spoked Wheels — $16.99–$18.99 + S&H
From Maxford USA, 15247 Texaco Ave., Paramount, CA 90723; Tel.: (562) 529-3988; Web: www.maxfordusa.com
The 2.5- and 3-inch vintage wheels are made of carbon-fiber spokes, wood rims, and foam tires. The hubs are metal tubing for durability.
- Very lightweight, strong wheel capable of supporting the 40-inch Albatros, 38-inch and 50-inch Jenny, and other models in that size range.
- Tires are preassembled and painted black, ready to use right out of the package.
DeNight Special 50 ARF — $224.99 + S&H
From Horizon Hobby Inc., 4105 Fieldstone Rd., Champaign, IL 61822; Tel.: (800) 338-4639; Web: www.hangar-9.com
During the 1950s and ’60s, Bart DeNight’s one-of-a-kind Formula 1 speedster was a force to be reckoned with on the full-scale air-racing circuit. Hangar 9 has wonderfully captured the look and feel of the DeNight Special with this exciting sport-scale ARF.
Designed to accept a wide range of glow and electric power plants, the DeNight Special ARF will give you all the speed and thrills you would expect from a scale-looking air racer without any of the tricky flight characteristics. Assembly takes just a few evenings, and most of the details, such as the authentic trim scheme and painted pilot figure, are already added for you.
- Wingspan: 58.5 inches
- Wing area: 626 square inches
- Flying weight (depending on equipment): 6.25 to 7 pounds
RCGF 100cc Gas Engine — $699.95 + S&H
From BP Hobbies, 140 Ethel Rd. W., Suite J, Piscataway, NJ 08854; Tel.: (732) 287-3933; Web: www.bphobbies.com
BP Hobbies is now a U.S. distributor for RCGF RC gas engines made by Zhejiang RCGF Model and Engine Company. These gas engines are known worldwide for high quality, power, and customer support. Engines range in size from 20cc up to a 150cc twin.
All RCGF engines include:
- Prop adapter
- Muffler
- Motor standoff
- Spark plug
- Electronic CDI ignition
- One-year manufacturer’s warranty
RCGF engines start easily, run strong, and offer great fuel economy at a price far less than comparable glow engines. From 60-size to 40% aircraft, RCGF has suitable power plants.
Specifics for the 100cc gas engine:
- Maximum output: 9.6 horsepower
- Weight: 92 ounces (including ignition and muffler)
- Recommended propeller: 27 x 10
A-10 (40-inch wingspan)
(Prepainted injection-molded foam model; removable canopy, two ducted fans)
The new 40-inch-wingspan A-10 includes two 75mm ducted fans with two outrunner brushless motors and two 18-amp controllers. Power is supplied by a three-cell, 2200 mAh Li-Poly battery that is easily accessed under the removable canopy. A balancing charger is also included in the kit.
The aircraft comes out of the box all prepainted and decorated in injection-molded foam. Assembly is quick: the wing halves need to be glued together and the motor nacelles glued to the fuselage (fans and motors are preinstalled).
- Motors must be plugged into the speed controls and the direction of rotation checked; no soldering required.
- All servos are preinstalled and all control surfaces are prehinged.
- The wing is removable and reinforced with a carbon rod.
- The two fan units produce strong thrust at moderate speed and low amp draw.
The wide stance of the tricycle landing gear gives the A-10 great ground handling for taxiing and takeoff and superior control in landing. Flying the A-10 offers precise, not overly sensitive steering on takeoff. Once airborne, climb is strong and control is smooth and quick. Big loops, fast or slow rolls, and inverted flight are easily accomplished. Flight times of up to eight minutes are possible. Landings are best accomplished with a small amount of throttle for a smooth approach.
FREDe — $59 + S&H
From Stevens AeroModel, Box 15347, Colorado Springs, CO 80935; Tel.: (719) 387-4187; Web: www.stevensaero.com
FREDe is a Stevens AeroModel ToonSCALE version of Eric Clutton's F.R.E.D.: Functional Runabout Experimental Design. FREDe's airframe assembles quickly thanks to precision, laser-cut, interlocking components and simple yet thoughtful engineering.
This rugged design features a shock-mounted landing gear system that soaks up bumps and bruises a beginner can deliver. FREDe delivers stable, predictable performance with plenty of fun, allowing for all rudder, elevator, and throttle aerobatics including flat and falling-leaf spins.
- Flying weight: 12 ounces
- Wingspan: 27 inches
- Wing area: 265 square inches
- Wing loading: 6.5 ounces per square foot
BVM O-Clips — $15.95 + S&H
From BVM Inc., 3481 SR 419, Winter Springs, FL 32708; Tel.: (407) 327-6333; Web: www.bvmjets.com
There are a number of devices on the RC market that help organize the installation of electronic and pneumatic lines in your model. The "O-Clip" system adds a new dimension to the task.
The "O-Clip" system is nonspecific regarding tubing diameter or wire size and allows grouping of these components where convenient.
Package contents:
- Four each of the three sizes of "O-Clips" (total of 12 clips)
- Appropriate size O-rings (a few extras of each)
- Two rolled strips of 1/64 x 1/2 x 12 plywood
This group of 12 clips and accessories is sufficient for most medium-size models.
Transcribed from original scans by AI. Minor OCR errors may remain.
